Thursday, 30 April 2020

Tack Care During Lockdown


Strange times indeed and for many if not most riders, riding activities and hence the use of tack have been much reduced recently. At the same time, more than a few of us have been doing a little online shopping, so we may just have one or two item of lovely new tack too! So how should you care for your leather tack during lockdown? Master Saddler and Master Saddle Fitter Kay Hastilow advises …

For all new leatherwork, it is best (having first satisfied yourself that it fits correctly and you are not going to want to return it) that you treat it with a good leather dressing. We do not recommend using oil now - neatsfoot was the favourite when I was younger, followed rapidly by Mars oil, but many of the dressings available today are far superior. I personally use Oakwood leather dressing on my own tack. Rapide is another good one, but there are many more on the market, most of which do a good job.

Take the leatherwork apart if it is a bridle or accessories and go over all of the leather with a LIGHT covering of dressing. Leave to soak in, preferably overnight, then put the items back together. Although you won’t have been able to get a qualified saddle fitter to visit and fit a new saddle due to the current Covid-19 restrictions, the same would apply - give a light covering, and don’t forget to treat up under the skirts of the saddle (the flaps of leather that cover the stirrup bars) and get the dressing into all nooks and crevices. BE CAREFUL however if the seat and knee pads are of suede or nubuck. You do not want to get leather dressing onto these.

Remember, a LIGHT covering, don’t smother the leather as the dressing will not soak in and the leather will become sticky and dull. A little two or three times over the space of a couple of weeks is better that three times as much in one go.

Sometimes if stored for a period, as is likely to be the case currently, your tack may have become very hard and dry. What to do?

First of all, some leather used for the tack is of very poor quality. This tends to be hard and inflexible when you buy it and stays that way no matter what you treat it with. It can be rather brittle and can break in use. Best get rid of it before you or your horse gets injured by it.

Sometimes though, leatherwork of a good quality may go hard or brittle. This can be due to neglect – or storage, as leather needs a bit of help to stay supple and if you don’t treat it occasionally with a good leather dressing it will become very hard. That means taking bridles apart, cleaning the leather thoroughly with a damp cloth or sponge and allowing to dry afterwards (best left overnight in somewhere warm, not somewhere cold and damp) and then making sure the dressing gets into all the turns, under keepers and the like. The turn on the body of a martingale for instance (the bit that the girth goes through) gets very wet and muddy, plus sweat from the horse gets into the leather here. Make sure that the dressing gets to the inside edge of all the leather, as well as the outside.

Another reason for hard leatherwork can be if it has been soaked, say a day out in heavy rain, and then dried too rapidly, possibly with heat being used to help dry it out. NEVER USE HEAT TO DRY TACK. It will go very brittle and could be dangerous. Keep the leatherwork in a warm room until it is dry, then put on a light covering of leather dressing. Do not put dressing on until the leather is totally dry, as that would seal any remaining damp into the leather.

The best way to care for your tack is to treat it with a good leather dressing when you first get it, wipe the leatherwork with a damp cloth or sponge after use and add more dressing when it starts to look a little dry. Rarely more than once a month once the leather is worn in, unless it has been soaked or heavily used (think endurance). I still use glycerine saddle soap to ‘finish’ a bridle when we are going somewhere. It gives a nice finish if used sparingly, but apparently this is no longer considered the right thing to do. Hey Ho. Some of my bridles are over 30 years old, so perhaps it’s not too bad!

LEARNING IN LOCKDOWN

Increasing your own knowledge will help you work more closely with your saddle fitter and your horse will benefit and most of us do have time for once to take advantage of the opportunity to add meaningfully to our equine knowledge and expertise.

Take a look at Kay’s two unrivalled and informative videos at https://vimeo.com/ondemand/saddlefittingknowhow 

Kay says; "Knowing when you need to book your saddle fitter is an important aspect of managing all ridden equines. Having spent more than 50 years working with saddles and fitting them to horses and ponies, I have retired from actively fitting saddles and I am now focused on sharing what I’ve learnt to help develop knowledge and understanding of what goes into achieving a correct saddle fit. I feel that video enables me to do that much more effectively than would be possible in a book. I enjoyed the project immensely and am delighted with feedback from those who have already bought my two videos, which are specifically to help Riders and their Trainers understand a little more about saddle fitting and why it is so important for every ridden horse and pony.”

Saddle Fitting Know How - For Riders and Trainers is available as two videos for unlimited download or streaming from Kay’s own Vimeo On Demand page for a one-off charge of just £35 per video – less than the cost of a good quality saddlecloth or a lesson from a trainer! 

The first video looks at Conformation and Movement of the Horse, Types of Tree and their Influence, Different Panels and the Position of Girth Straps.

The second video explains How to Assess a Saddle for Soundness, Straightness and Safety, Recognising a Good Fit, the Balance of a Saddle, When Saddles Move and finally, Rider Influences. 

Together these two videos contain a huge amount of information and provide over an hour of expert Saddle Fitting Know How. Certain to become a ‘go-to’ resource, one that you’ll view again and again, Saddle Fitting Know How – For Riders and Trainers uses clever graphics alongside clear explanations and insight into many different aspects of achieving and maintaining a correctly fitting saddle.

Find out more and get access to these unrivalled and informative videos at https://vimeo.com/ondemand/saddlefittingknowhow 

Your horse will thank you in more ways than one - and your performance will benefit too!


Saturday, 4 April 2020

Stirrup Bars; Why Design and Position Are So Important


There are lots of different ideas about stirrup bars - which are the bars on the saddle from which the stirrup leathers are attached. Master Saddler and Master Saddle Fitter Kay Hastilow explains more ...

For many years, the most common type of bars in use were the ones with a ‘thumb bit’ at the end (pictured), which could be ‘closed’ or ‘up’, or left down so that they continued a straight line beyond the main body of the bar. Opinions were many and varied as to which was correct, so let me run through the options.

Originally, the thumb bit was designed to be ‘closed’ or ‘up’. This was in the days when the bar laid across the leather of the flap, which had no recess for the bar and leather to sit in. The bulk of the leather and buckle could be felt through the skirts of the saddle. It was expected that the bars would be regularly cleaned and oiled, so that the thumb bit would drop down and release the leather in the case of a fall. Then came the recess for the bar, which greatly improved the comfort for the rider, but not necessarily the horse, especially as the manufacturers often turned the bars in so that there was even less bulk under the rider’s leg.

Few people knew how important it was that the joint of the thumb bit to the bar should be regularly cleaned and oiled, so this was rarely undertaken. Unfortunately, this usually meant that the thumb bit, usually left down, put excessive pressure onto a small area of the horse’s back. Small sore areas would eventually end up as white patches, and these were commonly seen when saddle fitting in days past. 

Happily, our manufacturers, led by our knowledgeable and growing army of SMS qualified saddle fitters, now turn the bars out, so that the pressure is largely removed from the horse’s sides. However, they are still recessed and this necessitates the thumb bits being down for safety, as the stirrup leather is fractionally slower to slide off in the event of a fall. Just occasionally, the bar might be turned out too much and the leather will keep coming off whilst you are riding- a very unpleasant experience. This can be corrected by a bench saddler (a craft saddler who makes and repairs saddlery). 

Often now though, you will see hook bars used instead. To my mind, these are a great improvement on the bars with the thumb bit. The leathers come off easily if the rider falls, but the shape holds the leather in place whilst riding and jumping. The ends of the hooks on some designs are very slightly turned out, and, although the rider is not affected by this, there is little chance of this end causing any discomfort to the horse.

Do bear in mind that the bulk of the stirrup leather is now probably the main pressure point against the horse’s sides, so whilst choosing quality and safety in your leathers, please avoid very thick leathers purely for the horse’s comfort.


Find out more about this and much more from Kay Hastilow’s series of expert videos on


Building your knowledge will benefit your horse and your riding – and help you work more effectively alongside your saddle fitter ...

Kay explains; “I have spent more than 50 years working with saddles and fitting them to horses and ponies. Having now having retired from actively fitting saddles, I am focused on sharing what I’ve learnt to help develop knowledge and understanding of what goes into achieving a correct saddle fit and feel that video enables me to do that much more effectively than would be possible in a book. I enjoyed the project immensely and am delighted with early feedback from those who have already bought the videos.”

Saddle Fitting Know How - For Riders and Trainers is available as two videos for unlimited download or streaming from Kay’s own Vimeo On Demand page for a one-off charge of just £35 per video – less than the cost of a good quality saddlecloth or a lesson from a trainer! 

The first video looks at Conformation and Movement of the Horse, Types of Tree and their Influence, Different Panels and the Position of Girth Straps.

The second video explains How to Assess a Saddle for Soundness, Straightness and Safety, Recognising a Good Fit, the Balance of a Saddle, When Saddles Move and finally, Rider Influences.

These two new videos contain a huge amount of information and together they provide over an hour of expert Saddle Fitting Know How. Certain to become a ‘go-to’ resource, one that you’ll view again and again, Saddle Fitting Know How – For Riders and Trainers uses clever graphics alongside clear explanations and insight into many different aspects of achieving and maintaining a correctly fitting saddle.


Find out more and get access to these unrivalled and informative videos at  


Your horse will thank you in more ways than one - and your riding will benefit too!